Altro Tect SR™ slip-resistant resin kit - Altrodirect
Altro Tect SR™ slip-resistant resin kit - Altrodirect
Altro Tect SR™ slip-resistant resin kit - Altrodirect
Altro Tect SR™ slip-resistant resin kit - Altrodirect
Altro Tect SR™ slip-resistant resin kit - Altrodirect
Altro Tect SR™ slip-resistant resin kit - Altrodirect
  • Load image into Gallery viewer, Altro Tect SR™ slip-resistant resin kit - Altrodirect
  • Load image into Gallery viewer, Altro Tect SR™ slip-resistant resin kit - Altrodirect
  • Load image into Gallery viewer, Altro Tect SR™ slip-resistant resin kit - Altrodirect
  • Load image into Gallery viewer, Altro Tect SR™ slip-resistant resin kit - Altrodirect
  • Load image into Gallery viewer, Altro Tect SR™ slip-resistant resin kit - Altrodirect
  • Load image into Gallery viewer, Altro Tect SR™ slip-resistant resin kit - Altrodirect

Altro Tect SR™ slip-resistant resin kit

Regular price
£43.65
Sale price
£43.65
Regular price
Sold out
Unit price
per 
Delivery calculated at checkout.

Product description

Altro TectTM Slip-resistant Kit

 

Unfamiliar with Altro resins? Epoxy floor coatings in a nutshell…

 

They give you an excellent, hard-wearing and protective finish over concrete and other suitable substrates. Generally, they offer a higher level of performance than paints and thinner seals – plus they are available in a choice of colours. They are mostly self-priming, consist of a base and a hardener, and provide good chemical and abrasion resistance.

 

Altro Tect is available in diverse “variants” – these are options, which offer different performance criteria. This kit is based on the Slip-resistant  variant of Altro Tect. We also offer an Altro Tect™ Standard Kit and other options in the main Altro Tect range.

 

Get all the benefits of a slip-resistant epoxy resin floor in a pre-packaged kit. 

 

This kit is the ideal floor coating for areas such as warehousing, workshops, plant rooms, storage areas and garages, where you might occasionally spill water and want a fully sealed surface, which is easy to clean and maintain. It gives you a tough, durable, coloured finish for your space.

 

Altro Tect Slip-resistant is a great option for where you need good chemical and abrasion resistance in these hard-working environments and other light to medium duty applications. It is for areas where your risk assessment indicates that you need slip-resistant protection from occasional spillages of water.

 

Altro Tect Slip-resistant is a low odour, solvent-free epoxy high-build floor coating. It incorporates a micaceous mineral, which lightly textures the surface. You will receive a three-part kit, which comprises a base, separate hardener and small container of slip-resistant additive, which you will need to mix using a slow speed drill and mixing paddle. Then use either a low-loss medium pile synthetic roller or dense foam rubber squeegee to apply from a large roller tray.

 

Product guarantee: 3 Years from date of purchase 

 

Guide coverage: 6.3kg unit = 1st coat 20m2.  2nd coat 25m2 

                             2.5kg unit = 1st coat 8m2.    2nd coat 10m2 

 

Samples: if you would like a sample, either call us or order your sample here

Our samples demonstrate colour and finish only and may not be of the thickness you require.

Installation

We want you to get the best result from your resin floor.

 

We have created the following overview and our supporting technical materials, not just to support you as you install this kit, but also to keep you safe. You must ensure you read, understand and follow our Health and Safety data sheets (MSDS Altro Tect Standard base and MSDS Altro Tect standard/slip-resistant/clear hardener) and our Technical data and installation guide

If you have any questions, call us before you start, we’re here to help. 

 

Who can typically install this resin kit?

We have designed this kit to be suitable for semi-skilled installers to use. Installing a resin floor is very different from installing a vinyl sheet or LVTs, so if you feel you lack the right experience to install this product and can benefit from professional help, please get in touch to discuss this with us. 

 

Substrate requirements 

Your substrates should be dry, structurally sound and free from contamination, friable materials or laitance, which may affect either the adhesion or penetration of the resin system. You must remove all residues of old paint coatings and dust. Substrates should achieve 26N/mm2 compressive strength and 1.5N/mm2 surface tensile strength, include an integral effective damp-proof membrane, and contain residual moisture not greater than 5% by weight (75% RH). 

 

Surface preparation 

Prepare the surface of the substrate with a dust enclosed diamond floor grinder, or lightly shot blast it, to leave a textured surface free from contamination. If the floor has been treated with a cementitious surface improver, prepare the surface following the manufacturer’s recommendations or abrade with a rotary floor preparation machine, followed by thorough vacuuming. Carry out any local repairs, treatment of cracks and holes, improvement or modification of levels and removal of high spots before installation. 

 

Installation conditions 

Apply in well-ventilated areas only. Both the slab and air temperature should be greater than 10 °C and rising, and up to a maximum of 25 °C. Ambient conditions should be maintained at least 3 °C above dew point or below 75% RH during initial stages of cure. As the resin flooring cures, in condensing conditions, moisture vapour may condense onto the surface and cause blooming: a permanent clouding of the surface. Cold, wet or humid conditions and limited airflow can result in condensation on the part-cure floor.

 

Mixing equipment

You will need: 

  • Slow speed drill (200-500rpm) such as MM17*
  • Mixing paddle such as MR2 60B*

*All tool number references relate to Refina Ltd. Call to order on 01202 632 270. 

 

 Roller and accessories kit comprising 

  • 60” x 15/16” wooden stale
  • 12” dual arm paint roller frame – CR
  • 12” microfibre paint roller D/A 8mm pile

Available to buy here

 

 Large roller tray 

 Available from any hardware store 

 

Cleaning

Clean all tools and equipment regularly during installation.

 

Personal Protection equipment (PPE)

Ensure that you wear the correct PPE at all times.

 

Product installation 

Using a slow speed drill and paddle thoroughly mix the base colour for 30 seconds. Pour all of the hardener into the pre-mixed base and mix for a further 2 minutes. Add the slip-resistant aggregate and mix for a further minute. Pour all of the mixed contents into a large roller tray and distribute evenly and uniformly onto the prepared substrate. Begin on the side of the main light source and work away from the light. Finish using a roller in the direction of the light source to ensure that you achieve a uniform and even coverage. Do not re-touch the area after 15 minutes, as this may cause variations in the finish. Allow the floor to cure for a minimum of 18 hours but for no more than 24 hours at 20  °C,before over-coating with the second coat.

If you exceed the 24 hours, you should lightly abrade and vacuum the surface before you apply the second coat. Ensure good airflow to assist with the cure.  High temperatures, strong draughts and substrate porosity can affect the lapping time and can cause roller marks.

 

Full cure

You should achieve full cure in 7 days at 20 °C.  Untreated felt paper is sufficient as protection from light traffic.

 

Your completed installation

As with other single colour finishes available on the market, Altro Tect Slip-resistant may exhibit scratching with traffic and abrasion, this is particularly noticeable in darker colours. In general, flooring will follow the profile of the underlying substrate. Thinner resin flooring types may reflect the surface profile. This will affect the appearance and wear.

Specification

Suitable substrates: concrete, polymer-modified cementitious screeds and terrazzo 

Finish: tough and durable

Interior use only 

Primer: not generally required 

Number of coats: 2 

Component parts: 1 x base colour + 1 x hardener + 1 x slip-resistant additive

Guide coverage: 6.3kg unit = 1st coat 20m2. 2nd coat 25m2 

                             2.5kg unit = 1st  coat 8m2. 2nd coat 10m2 

Nominal thickness: 350-500 microns (finished thickness after 2 x coats) 

Curing time: 1st coat = 18-24 hrs @ 20 °C 

                      2nd coat = 24 hrs @ 20 °C

                      Light foot traffic = 24 hrs @ 20 °C 

                      Full chemical cure = 7 days @ 20 °C 

Minimum application temperature: 10 °C and rising } 

Ambient temperatures: maintain at least 3 °C above dew point or below 75% RH

Maximum application temperature: 25 °C } 

Open time: approximately 25-30 minutes at 20 °C once mixed and transferred onto the floor 

Shelf life: 12 months from date of purchase 

Storage: store in a dry, frost-free environment and condition between 

15 °C and 20 °C for at least 3 days before laying 

Bond strength: B3,5

Equipment needed:  Slow speed drill (200-500rpm) such as MM17* 

                                   Mixing paddle such as MR2 60B*

                                   *All tool number references relate to Refina Ltd. Order on 01202 632 270

                                

Roller and accessories kit comprising

  • 60” x 15/16” wooden stale
  • 12” dual arm paint roller frame – CR
  • 12” microfibre paint roller D/A 8mm pile

Available to buy here

 

Large roller tray: Available from any hardware store 

Cleaning tool: all tools and equipment should be regularly cleaned

PPE: ensure that the correct PPE is worn at all times

Kit components

The kit is available in four colours and two sizes. When you place your order, your kit will include the right amount of base, hardener and slip-resistant additives for the overall size of kit you have chosen, as shown below:

 

Order codeColours available                           Total size of kit

Size of base component

supplied in kit

Size of hardener component supplied in kitSlip-resistant additives supplied in kit
TTP6k041Altro Tect Slip-resistant Kit Doe 6.3kgAltro Tect Doe 5.35kgAltro Tect Hardener 0.95kg

Altro PLUS6

 

TTP6k013Altro Tect Slip-resistant Kit Black6.3kgAltro Tect Black 5.35kgAltro Tect Hardener 0.95kgAltro PLUS6
TTP6k009Altro Tect Slip-resistant Kit Jade6.3kgAltro Tect Jade 5.35kgAltro Tect Hardener 0.95kgAltro PLUS6
TTP6k022Altro Tect Slip-resistant Kit Wedgewood6.3kgAltro Tect Wedgewood 5.35kgAltro Tect Hardener 0.95kgAltro PLUS6
TTP2k041Altro Tect Slip-resistant Kit Doe 2.5kgAltro Tect Doe 2.117kgAltro Tect Hardener 0.382kg

Altro PLUS2

 

TTP2k013Altro Tect Slip-resistant Kit Black2.5kgAltro Tect Black 2.117kgAltro Tect Hardener 0.382kgAltro PLUS2
TTP2k009Altro Tect Slip-resistant Kit Jade2.5kgAltro Tect Jade 2.117kgAltro Tect Hardener 0.382kgAltro PLUS2
TTP2k022Altro Tect Slip-resistant Kit Wedgewood2.5kgAltro Tect Wedgewood 2.117kgAltro Tect Hardener 0.382kgAltro PLUS2

 

Data sheets and installation guides

We have created our Health and Safety data sheets and full Technical data and installation guide not just to support you as you install this product, but also to keep you safe. You must ensure you read and understand them before you start your installation and then follow them. If you have any queries, please call us.

 

Health and Safety data sheets 

MSDS Altro Tect Standard base 

MSDS Altro Tect standard/slip-resistant/clear hardener

 

Technical data and installation guide

Accessories

We have compiled the following list of accessories that you will need to complete your resin installation. If you don’t already have them, we have listed where they are available from.

 

Available from Altro:

 

Roller and accessories kit comprising link

  • 60” x 15/16” wooden stale
  • 12” dual arm paint roller frame – CR
  • 12” microfibre paint roller D/A 8mm pile

Available to buy here

 

Large roller tray 

 Available from any hardware store

                     

Available from Refina:

 

Mixing equipment

You will need: 

  • Slow speed drill (200-500rpm) such as MM17*
  • Mixing paddle such as MR2 60B*

*All tool number references relate to Refina Ltd. Call to order on 01202 632 270

er